Diy Twin Platform Bed Construction Guides

Author: Duret Quentin | Categories: Indoors comments
Twin Platform Bed For Kids

Twin platform bed have a mattress without the need for a box spring. Solid panels or wooden slats support mattresses of different thicknesses. A double bed fits a 54-inch wide, 74-inch-long mattress platform, which offers adequate sleeping space without taking up much space. Double beds on the platform are aesthetically pleasing to any bedroom guest room or in need of clean lines and simple design. A platform bed has a raised types that reduces the need for a mattress. The base of the platform is strong and robust enough that it supports the mattress and prevents sagging. If you want extra help or a higher bed, use a box spring, in combination with the mattress. When framing a bed of a metal frame, use the platform on top of the frame.

The bed frame adds additional support, while the platform raises the height of the box spring. Make the twin platform bed diy from two measuring plates of 39 inches by 10 inches by 1 inch and two tables measuring 75 inches by 10 inches by 1 inch. Place the boards in a rectangular shape, making a large box. The sides measure 75 inches, the upper and lower 39 measure inches and the box should be 10 inches high. Apply the wood glue to the edges of each board and press the boards together. Attach wooden clamps to the edges of each board. The clamps hold the pieces together firmly until the glue dries the wood. Wipe with a damp cloth over the edges, only to remove any traces of glue. Place a 1 ½ inch wood screw in a corner, where two plates meet.

Related :   Wall Mounted Fans in Bathroom

Sink two screws in the wood. His way of working around the box of the platform, which sinks two screws in each corner. The combination of screws and glue keeps the platform together. Organize ten wooden boards of 39 by 2 by 2 inches at the top of the platform. Space the joints evenly across the twin platform bed frame with storage. Each board should be level with the edges of the platform. Sink two wood screws at the end of each board, tightening the screws on the platform. Holes of the drill through the frame of the metal bed. Space through the holes on each side, making a hole every 2 inches. Rotate the frame of the head platform so that the side of the support touches the floor and place the metal structure on top. Place the wood screws through each hole in the metal bed frame.

Comments are closed.